UNS R60702 Welded Zirconium Tubing Zr702 For Industrial Corrosive Pipeline

Product Description

UNS R60702 Zirconium Welded Tubing Zr702 For Industrial Corrosive Pipeline Applications

Zirconium Welded Tubing is commonly used in highly corrosive industrial applications, usually in chloride processes. These and other highly corrosive chemicals can damage smaller materials. This corrosion can cause equipment to be quickly repaired and/or replaced in a short period of time, leading to costly and highly damaging process shutdowns.onium is mainly used in chemical and electronic industry, mainly used in the corrosion resistance and conductivity of zirconium tubing.

CHEMICAL COMPOSITIONS (NOMINAL)

Zirconium Welded Tubing PHYSICAL PROPERTIES

Density: 6.51 g/cc
Melting point: 1852°C
Thermal conductivity: 22 W/(m °C)
Elastic bending modulus: 99.6 GPa
Thermal expansions: 5.4x10 /°C

Nominal Specification

• Seamless tubing OD(8-152) * t (0.5-15) * L (≤ 9000) mm

• Welded tubing (outer diameter ≥ 10mm)

• Executive Standards: ASTM B523 / B523M-18, ASME SB-523, ASTM B658 / B658M-11, ASME SB-658 / SB-658M

Zirconium Welded Tubing Picture:

Zirconium Introduction

Zirconium and gas have strong affinity. They react with oxygen, hydrogen and nitrogen at about 200, 300 and 400 ℃ respectively. The reaction is rapid at higher temperature. Therefore, the melting and heat treatment should be carried out in vacuum furnace. When heat processing is carried out in the atmosphere, proper protection measures shall be taken and the operation time under high temperature shall be shortened.

Zirconium Welded Tubing Application
It is widely used in heat exchange equipment, such as tubular heat exchanger, coil heat exchanger, serpentine heat exchanger, condenser, evaporator and pipeline.